romem.exe : Port address and signal assignment


Data port assignment : write data

Status port assignment :  N/A

Control port assignment

Bit: LPT signal  | Assign
----------------------------------
 0 : -Strobe     |  AINC   Address counter incriment. falling edge:incriment.
 1 : -AutoFDXT   |  WR     RAM write enable. 0:write enable
 2 :  INIT       | -CLR    Clear Address counter. 0:clear
 3 : -SLCTIN     |  DIR    Direction. 1(L):Terget port , 0(H):AT Host port
 4 :  IRQEN      |  0      (disable)
 5 : (direction) |  0      (output)
 6 :  N/A        | 
 7 :  N/A        |