Go to the first, previous, next, last section, table of contents.
- MakeCD version:
-
MakeCD 2.2
- Computer:
-
- Amiga 1200, OS 3.1, 2Mb Chip 16Mb Fast, VBR in Fast RAM
- 5 Zorro II Slots by Micronik
- M1230 XA accelerator by Microbotics
--> 68030 processor (CPU) at 50MHz with MMU
--> 68882 coprocessor (FPU) at 50MHz
--> one HYUNDAI SIMM of 16Mb single sided, 60ns with parity chip
- Toccata 16bit soundcard by MacroSystem
- DKB RapidFire SCSI-II controller
- Conner Peripherals 1.2 gig AT/IDE HD
--> MaxTransfer = 0x1ffe0
- SCSI device:
-
dkbscsi.device
- CD writer:
-
PHILIPS CDD 2000 V1.20 --> MANUFACTURED MARCH 1996
- CD-ROM drive:
-
MITSUMI FX200 V?.?? --> MANUFACTURED MAY 1995 FOR IBM N.Y.
(This is an atapi drive - I use it with atapi.device)
- Other devices at the same SCSI bus:
-
IOMEGA Z100i ZIPDRIVE INSIDER SCSI-II MODEL
System works fine. No SCSI hangups. +20 CD-Rs written, some trashed due
to wrong settings, all the rest were successful.
The same CD writer was also tested on an A4000 with a GVP SCSI-II
controller (V2.?? an old one!). We could only write at single speed. But
with a ROM update for the controller it should work.
Tested by Korneel Ketelslegers.
EMail via: crisp@unicall.be - Subject: KORNEEL KETELSLEGERS
Go to the first, previous, next, last section, table of contents.