Printer definition file for WSSINDEX custom print utility All lines of this file are comments until a line beginning ----. After that, alternate lines are comments and parameters. See the CUSTPRNT documentation for a description of the format allowed here. The codes in the distributed version of this file are for an Epson-compatible dot matrix printer, but you may alter these to suit your needs. To make it easier for people to read the printer sequences, I have used blanks to separate characters, and commas to separate multi-character printer commands. Most of these delimiters are not required by the routine which reads this file. Commands used in this file: \e A 6 = 6/72 inch line feed (12 lines per inch) \e A 9 = 9/72 inch line feed (8 lines per inch) \e S 0 = superscript mode 0xf or 15 = compressed print \e @ = reset ------------------------------------------------------------ Printer name Epson compatible dot matrix printer Optional string printed on all labels Property of Printer initialization command for 1,2,... column printing, 50 max Printer initialization command for labels, 50 max (pitch, line spacing, etc.) \e A 6,\e S 0,0xf Printer initialization command for disk covers, 50 max \e A 9,15 Printer deinitialization command, 10 max (form feed for laser printer, etc.) \e @ Number of spaces in left margin for labels 5 Number of columns for labels 1 Width of labels (characters) 50 Number of characters between labels (if multiple columns) 5 Length of label in lines (including unusable lines) 12 Number of usable lines for label 9 Number of spaces in left margin for disk covers 0 Width of paper for disk covers (characters) 90 Length of page in lines for disk covers 40 Printer command to position for the next disk cover 10 10 10 10 Character to use for sides of disk cover box (32 = blank prints faster) 245 Character to use for top and bottom lines 241 Character to use for top left corner 240 Character to use for top right corner 242 Character to use for bottom left corner 246 Character to use for bottom right corner 247 End of printer configuration file