Suggested settings for using a US Robotics Dual Standard Modem (16.8 HST /
21.6 V.32ter / 28.8 V.FC) with BinkleyTerm ST (and any other terminal
software for that matter like STalker, Flash, CoNNect).

==========================================================================

ati4
USRobotics Courier HST Dual Standard V.FC Fax Settings...

   B0  C1  E1  F1  M1 0  V1  X7
   BAUD=115200 PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER

   &A3  &B1  &C1  &D2  &G0  &H1  &I0  &K1  &L0  &M4  &N0
   &P0  &R2  &S1  &T5  &X0  &Y1  %N6  

   S00=000  S01=000  S02=043  S03=013  S04=010  S05=008  S06=002  S07=255  
   S08=001  S09=006  S10=007  S11=039  S12=050  S13=000  S14=000  S15=072  
   S16=000  S17=000  S18=000  S19=000  S20=000  S21=010  S22=017  S23=019  
   S24=150  S25=005  S26=001  S27=000  S28=014  S29=020  S30=000  S31=000  
   S32=006  S33=000  S34=000  S35=000  S36=000  S37=000  S38=002  S39=000  
   S40=000  S41=000  S42=126  S43=200  S44=015  S45=000  S46=000  S47=000  
   S48=000  S49=000  S50=000  S51=000  S52=000  S53=000  S54=000  S55=000  
   S56=000  S57=000  

   LAST DIALED #:                                       

OK
ati7
Configuration Profile...

Product type           US/Canada External
Options                HST,V32bis,Terbo,V.FC
Fax Options            Class 1/Class 2.0
Clock Freq             20.16Mhz
Eprom                  256k
Ram                    32k

Supervisor date        05/25/94
DSP date               05/25/94

Supervisor rev         6.0
DSP rev                11.1

OK

==========================================================================