Maxtor Panther P0-12S and P1-17S 1.2 and 1.7 Gig. SCSI drives Performance Specifications 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컫컴컴컴컴컴커 � Capacity, Unformatted � P0-12S � P1-17S � � 쳐컴컴컴컴컵컴컴컴컴컴캑 � Per drive (Mbytes) � 1,224 � 1,759 � � Per surface (Mbytes) � 81.6 � 92.6 � � Per track (Bytes) � � � � MINIMUM � 35,795 � 41,650 � � MAXIMUM � 51,858 � 60,095 � �*Capacity Formatted (512 BPS) � � � � � � � � Per drive (Mbytes) � 1,051 � 1,503 � � Per surface (Mbytes) � 70.1 � 79.1 � � Per track (Bytes) � � � � MINIMUM � 30,720 � 35,840 � � MAXIMUM � 44,544 � 51,712 � � � � � � Transfer rate, Mbits/sec � � � � MINIMUM � 17.2 � 20.1 � � MAXIMUM � 24.9 � 28.9 � � � � � � Seek time, typical **Msec � � � � Average � 13 � 13 � � Track to Track � 2 � 2 � � Full Stroke � 26 � 26 � � Maximum � � � � Average � 15 � 15 � � Track to Track � 2.5 � 2.5 � � Full Stroke � 30 � 30 � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컨컴컴컴컴컴켸 Functional Specifications 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컴쩡컴컴컴컴컴� � � P0-12S � P1-17S � � 쳐컴컴컴컴컴탠컴컴컴컴컴� � Rotational speed (rpm)* � 3,600 � 3,600 � � Average Latency (Msec) � 8.33 � 8.33 � � recording density (bpi) � � � � MINIMUM � 30,814 � 36,013 � � MAXIMUM � 37,836 � 42,981 � � Flux Density (fci) � � � � MINIMUM � 23,111 � 27,009 � � MAXIMUM � 28,377 � 32,235 � � Track Density (tpi) � 14,50 � 14,98 � � Cylinders � 17,95 � 17,78 � � Sectors per track (512 Bytes per sector) � 60-87 � 70-101 � � Sectors (512 Bytes)** � 2,053,275 � 2,947,261 � � Data Heads � 15 � 19 � � Servo Heads � 1 � 1 � � Disks � 8 � 10 � � � � � � � � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴좔컴컴컴컴컴� * Accurate to +/- .1% ** With Spares Environmental Specifications 旼컴컴컴컴컴컴컴컴컴컫컴컴컴컴컴컴컴컴컴컴컴컴컫컴컴컴컴컴컴컴컴컴컴컴컴커 � � Equipment Operating � Equpiment Non-Operating � � 쳐컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴� 쿌mbient Temperature � 50� F to 122� F � -40� F to 140� F � � � 10� C to 50� C � -40�C to 60� C � � � � � 쿘aximum Temperature � 18�F/Hr (10� C/Hr) � 18�F/Hr (10� C/Hr) � 쿒radient � Below Condensation � Below Condensation � � � � � 쿝elative Humidity �8% to 80% Non-condensing �8% to 80% Non-Condensing � � 퀇ith maximum gradient of 퀇ith maximum gradient of � � �10% per hour �10% per hour � � � � � 쿌ltitude �-1,000ft to 10,000ft. �-1,000 ft to 40,000 ft � � �-305m to 3,048m �-305m to 12,192m � � � � � 쿣ibration, all Axes �5-25 Hz, 0.006 in. P-P �5-25, 0.006 in. P-P � �(inputs to frame �25-500 Hz, 0.2 G Peak �25-500 Hz, 0.2 G Peak � � of drive) 쿌cceleration. 쿌cceleration. � � � � � 쿞hock all Axes � � � �(inputs to frame �5G, with no physical �5G, with no physical � � of drive) 쿭amage and no data 쿭amage and no data � �11 msec Pulse Width,쿎orruption, but with 쿎orruption, but with � 쿓alf Sine Wave 쿝etries 2G, within error 쿝etries 2G, within error � � 퀁ate specification 퀁ate specification � � � � � 쿙oise �45 dba at 1 meter, � N/A � � 쿟ypical � � � � � � 쿌ir flow for Cooling�500 linear ft./min. � N/A � � 쿪t -1,000 ft. to 10,000 � � � 쿯t. Altitude � � � � � � 읕컴컴컴컴컴컴컴컴컴컨컴컴컴컴컴컴컴컴컴컴컴컴컨컴컴컴컴컴컴컴컴컴컴컴컴켸 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Maxtor Original Fabrication Panther SCSI 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 POWER 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컴컴컴컴컴컴컴컴컫컴컴컴컴컴커 � J1 (SCSI CONNECTOR) � � J3 � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 旼커 旼컴컴컴커 읕컴컴컴컴컴� � 쿕6� � J2 � � � .. JP10 읕켸 읕컴컴컴켸 � � .. JP11 JP5 .. � � JP6 .. .. JP3 � � 旼컴컴커 � � .. JP4 � U1 � � � 旼컴� � � � � 쿢13� 읕컴컴켸 � � 읕컴� ..JP2 旼컴컴커 � 쳐� .. JP9 旼컴컴컴컴컴컴� � U2 � � � � � U7 � 쳐컴컴캑 � 쿕� JP8 .. � � � U3 � � �4� 읕컴컴컴컴컴컴� 읕컴컴켸 � � � � 쳐� � � � � � � 旼컴컴컴컴컴컴컴� � � � J5 � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컨컴컴컴컴컴컴컴컨컴컴켸 旼컴컴컴컴컴컴쩡컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컴컴커 쿕UMPER NUMBER� Description � Default � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 2 � IN= Write Protected OUT= Read and Write � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 5 � IN= Slave Sync. Termination � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 6 � IN= Master Sync. Termination � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP10 � IN= Termination Power supplied by Host � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP11 � IN= Termination Power supplied by Drive � IN � 읕컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴켸 PC BOARD 旼컴컴컴컴컴컴커 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� J3 � 읕컴컴컴컴컴컴컴컴컴컴쩡컴컴컫컴컴컴컴컴컴쩡컴컴컴컴컴컴컫컴좔컴컴컴컴컴컴켸 � o o � Pin 9 쿽 o o o o � Pin 1 � o o � Pin 10 쿽 o o o o � Pin 2 읕컴컴켸 읕컴컴컴컴컴컴켸 J6 J2 J2 PINS : 1 & 2: Remote LED 3 & 4: Parity Enable=OFF, Disable=ON 5 & 6: MSB Drive ID. Value when jumpered = 4 7 & 8: Drive ID. Value = 2 9 & 10: LSB Drive ID. Value = 1 I.E. For ID 6, Pins 5-6 and 7-8 should be jumpered. For ID 0, 5-6, 7-8 and 9-10 should all be removed. All other jumpers should are factory set and should not be changed. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Maxtor Common Fabrication Panther SCSI 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 POWER 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컴컴컴컴컴컴컴컴컫컴컴컴컴컴커 � J1 (SCSI CONNECTOR) � 旼커 旼컴컴컴� � J3 � 쳐컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� 쿕6� � J2 � 읕컴컴컴컴컴� � .. JP10 :읕켸 : 읕컴컴컴� � � .. JP11 JP6 JP13 .. JP5 � � 旼컴� 旼커 � � JP3 쿢13� 쿢9� 旼컴� � � 읕컴� 읕켸 쿒1 � : JP1 � � 읕컴� : JP12� 쳐� .. JP9 JP4 : 旼컴� 旼컴� 旼컴컴커 � 쿕� 쿢22� 쿢15� � U 2 � � �4� 읕컴� 읕컴� 읕컴컴켸 � � � 旼컴� � � � .. JP8 쿢4 � � 쳐� 쳐컴� � � JP7 : 쿢5 � � � 읕컴� � � � � � � � � 旼컴컴컴컴컴컴컴컴� � � � J5 � � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴좔켸 旼컴컴컴컴컴컴쩡컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴쩡컴컴컴컴컴컴커 쿕UMPER NUMBER� Description � Default � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 5 � IN= Slave Sync. Termination � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 6 � IN= Master Sync. Termination � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 10 � IN= Termination Power supplied by host � OUT � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 11 � IN= Termination Power supplied by drive � IN � 쳐컴컴컴컴컴컴탠컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴탠컴컴컴컴컴컴캑 � JP 13 � IN= Parity Disabled, OUT= Parity Enabled � OUT � 읕컴컴컴컴컴컴좔컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴좔컴컴컴컴컴컴켸 PC BOARD 旼컴컴컴컴컴컴커 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� J3 � 읕컴컴컴컴컴컴컴컴쩡컴컴컫컴컴컴컴컴컴컫컴컴컴컴컴컴컴컫컴컴좔컴컴컴컴컴컴켸 � o o � Pin 2 � o o o o o � Pin 10 � o o � Pin 1 � o o o o o � Pin 9 읕컴컴켸 읕컴컴컴컴컴컴컴� J6 J2 J2 Pins : 1 & 2: MSB Drive ID. Value when jumpered = 4 3 & 4: Drive ID. Value = 2 5 & 6: LSB Drive ID. Value = 1 7 & 8: Write Protect. IN= Enabled OUT= Read/Write 9 & 10: Remote LED 旼컴컫컴컴커 쿕P1 � JP12� 쳐컴컵컴컴캑 쿚UT � OUT � Start by ID Sequence 쿚UT � IN � Start Motor after 11-13 second delay 쿔N � OUT � Wait for Motor Start Command 쿔N � IN � Start motor when power is applied 읕컴컨컴컴켸 MFG OS ABC-Hotline Billstr. 236 20539 Hamburg per Fax