



uuLogin v2.00 - MS-DOS uucp Login Security Utility
Copyright (c) 1995-1996, High Mountain Software

Registered to: High Mountain Software, Chris Stone


AVALIABLE COMMAND LINE OPTIONS (REQUIRED):

 -N x or -NODE x  - Sets the node number to use
 -B x or -BPS x   - Set the serial port <--> modem baud rate to use
 -P x or -PORT x  - Sets serial port to use. For COM1: use -P 0 or -P COM1,
                    for COM2: use -P 1 or -P COM2, etc.

OPTIONAL COMMAND LINE PARAMETERS:

 -ADDRESS x       - Sets serial port address in hex (if Fossil is not used)
 -IRQ x           - Sets the serial port IRQ line (if Fossil is not used)
 -NOFOSSIL        - Disables use of Fossil driver, even if available
 -NOFIFO          - Disables use of 16550 FIFO buffers (if Fossil is not used)
 -?, -H or -HELP  - Displays this command line help and exits

