README FILE FOR NO_10ENV.ARC

                     Template by Richard Brown
                      GEnie Lamp ST Columnist

No_10ENV.DOC is a PageStream 2 document providing a tested method of
printing perfect No. 10 Envelopes on the Deskjet family of printers.

Based on the type sizes used, the default template is intended mainly
for personal letters. Use a more (boring) business-like font and size
for business purposes.

You must use "Configure Printer" under the "Global" drop-down menu to
set the printer for appropriate page size. Instructions as to how to
set page size as well as priming the Deskjet for envelope printing is
included in the bleed area BELOW the main document area. Show Full
Page to see these instructions.

** Note **

The instructions box WILL NOT PRINT and can remain as is to allow
helpful hints for others using this template.

** Mechanical Note **

The Deskjet, upon loading an envelope, may wind up leaving the
envelope slightly crooked. Lift the Deskjet's lid to see if the
envelope is actually square to the pressure plate above it. Although
this plate "floats" slightly, it is an accurate guage as to envelope
alignment.

If the envelope is NOT square, simple PUSH the side that protrudes
too far forward BACK until it appears square to the pressure plate.
At this point, print as usual (ALT P) in PageStream.

* You must LOAD THE ENVELOPE using the Deskjet's "ENVELOPE" button
  PRIOR to printing for best success:
     1. it guarantees 100% success.
     2. it allows you to check alignment (see "Mechanical Note").

** FONTS NOTE **

My font list is totally customized, with virtually NO possibility of
having identical font numbering as exists on your system. If you have
ANY problem loading this document, it means that you need to tidy up
your font list using the "MANAGER" option in the FONT menu. With a
properly set-up font list that has been saved as a DEFAULT,
PageStream will replace my font with one of yours, or at least use
your .12H (or other) preview mode screen font, then allowing you to
change the font used in the document.

** USING CARDFILE **

In text mode, simple ERASE the appropriate text in either text block
("to" or "from") and select the "minus" option of the SEND command in
Cardfile's MAIN MENU to instantly fill the text block with the address
of your choice.

** TESTING INFO **

This file has been used for some time, and very successfully on both
a Mega ST and TT030, printing to a Deskjet 500C, in both black ink
and color modes.

** CAVEATS **

As with all things free, this is a USE AT YOUR OWN RISK file.
However, about the worst thing that can happen is that you'll crash
PageStream, but this is EXTREMELY UNLIKELY.