Chrysler Cellular Telephones
CHRYSLER VISORPHONE
NAM Type: EEPROM
Manufacturer: OKI
Programmer: Keypad
ESN Prefix DEC: 129
HEX: 81
ESN, S/N Match Required: Yes
Available Channels: 832
Programming Sequence: Power On
After phone initialized, press 4 key and 6 key
simultaneously, then release.
Enter 10-digit password XXXXXXXXXX
0008693428 or 10-digit code programmed by
previous technician (enter within 20 seconds)
ESN and Software version will be displayed
Press 0 + 0 to initialize transceiver
Enter step number (1-9) then enter data
Press STO to enter each step
Press FUNC and phone reverts to "Press 1-9"
CLR key corrects data before STO is pressed
To program 2nd NAM, press * when phone displays
"Press 1-9" (this repeats steps 3-5)
Press CLR + CLR to write data in NAM
# digits
Mobile Number: 10 XXX-XXX-XXXX + STO + FUNC
System ID Format: 5 XXXXX + STO + FUNC
Initial Paging Channel: 3 XXX + STO + FUNC
Access Overload Class: 2 XX + STO + FUNC
Lock Code: 4 XXXX + STO + FUNC
Group ID Format: 2 XX + STO + FUNC
Station Class: 4 1000 + STO + FUNC
(Enter Station class in binary - 1000 binary, 08 decimal)
Options: 4 11X1 + STO + FUNC (see below)
Security Code: 6 XXXXXX + STO + FUNC
Press CLR + CLR to write data in NAM
Options: 0 (Disable)
1 (Enable)
MIN Option
Local Use
Handsfree
Audio mute
New Unlock Code: NAM
System Select: FUNC + 3 + 3 + 3, etc. (to scroll choices)
SCN AB
SCN BA
SCN A
SCN B
SCN Ho (Home)
SID NO. (Enter System ID #)
Press STO to enter selection