------------------------------------------------------------------------------- CLARION 1100 CT ------------------------------------------------------------------------------- NAM Type: Tri-State Manufacturer: Clarion Programmer: Motorola 1801 -- Celnam, Curtis or Bytek ESN Prefix DEC: 140 HEX: 8C ESN, S/N Match Required: No Programmable Handset: No Available Channels: 832 Phone Number Format: XXX-XXX-XXXX Lock Code Format: XXX MIN Option: Enabled Repertory Option: Enabled Handsfree Option: Enabled or Disabled Local Use Option: Enabled End-to-End Signalling: Enabled Horn Alert Option: Enabled System ID Format: XXXXX Preferred System: A or B Access Overload Class: XX Group ID Format: XX Initial Paging Channel: 333 or 334 Station Class: 08 Horn Alert: L/H + HORN/# (simultaneously) New Unlock Code: NAM System Select: FUNC + 2 + 0 + SRCH + SRCH + SRCH (to scroll) (one of the following will appear) Standard (AB or BA) Invert (BA or AB) Home Roam (A only or B only) Press STO to enter selection
------------------------------------------------------------------------------- CLARION 3000 CT ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Clarion Programmer: Handset ESN Prefix DEC: 166 HEX: A6 ESN, S/N Match Required: Yes Available Channels: 832 Programming Sequence: Power On (Err 3 may be displayed if phone has not been programmed) Press CLR + * + * + 123123 + # + # (within 10 seconds) 0 will be displayed Select NAM 1 thru 3 by entering 1, 2 or 3 Press RCL + step number + enter new information + STO (for each step) (To enter unlock code 123; RCL + ) + 123 + STO) Power OFF to exit program mode Unlock Code: 3or4 XXX or XXXX + STO System ID Format: 5 XXXXX + STO Local Use Option: 1 1 + STO MIN Option: 1 1 + STO Mobile Number: 10 XXX-XXX-XXXX + STO Station Class: 2 08 + STO Initial Paging Channel: 3 333 or 334 + STO Access Overload Class: 2 XX + STO Preferred System: 1 1(A) or 0(B) + STO Group Id Format: 2 XX + STO Power OFF to exit program mode.
------------------------------------------------------------------------------- CLARION 5100CT and 5200CT ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Clarion Programmer: Keypad ESN Prefix DEC: 166 HEX: A6 ESN, S/N Match Required: Yes Stamped Model Number: None (handset is labeled 5100CT or 5200CT) Available Channels: 832 Programming Sequence: Power On (Err 3 may be displayed if phone has not been programmed) Press CLR + * + * + 123123 + # + # (within 10 seconds) 0 will be displayed Select NAM 1 thru 3 by entering 1, 2 or 3 Press RCL + step number + enter new information + STO (for each step) (to enter station class; RCL + 5 + 08 + STO) Power OFF to exit program mode Unlock Code: 3or4 XXX or XXXX + STO System ID Format: 5 XXXXX + STO Local Use Option: 1 1 + STO MIN Option: 1 1 + STO Mobile Number: 10 XXX-XXX-XXXX + STO Station Class: 2 08 + STO Initial Paging Channel: 3 333 or 334 + STO Access Overload Class: 2 XX + STO Preferred System: 1 1(A) or 0(B) + STO Group ID Format: 2 XX + STO Power OFF to exit program mode. Display ESN: FCN + 6 Horn Alert: FCN + 8 + "+ or -" New Unlock Code: NAM System Select: FCN + 4 + "+ or -" (to scroll choices) + STO