-------------------------------------------------------------------------------
CLARION 1100 CT
-------------------------------------------------------------------------------
NAM Type: Tri-State
Manufacturer: Clarion
Programmer: Motorola 1801 -- Celnam, Curtis or Bytek
ESN Prefix DEC: 140
HEX: 8C
ESN, S/N Match Required: No
Programmable Handset: No
Available Channels: 832
Phone Number Format: XXX-XXX-XXXX
Lock Code Format: XXX
MIN Option: Enabled
Repertory Option: Enabled
Handsfree Option: Enabled or Disabled
Local Use Option: Enabled
End-to-End Signalling: Enabled
Horn Alert Option: Enabled
System ID Format: XXXXX
Preferred System: A or B
Access Overload Class: XX
Group ID Format: XX
Initial Paging Channel: 333 or 334
Station Class: 08
Horn Alert: L/H + HORN/# (simultaneously)
New Unlock Code: NAM
System Select: FUNC + 2 + 0 + SRCH + SRCH +
SRCH (to scroll)
(one of the following will appear)
Standard (AB or BA)
Invert (BA or AB)
Home
Roam (A only or B only)
Press STO to enter selection
-------------------------------------------------------------------------------
CLARION 3000 CT
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Clarion
Programmer: Handset
ESN Prefix DEC: 166
HEX: A6
ESN, S/N Match Required: Yes
Available Channels: 832
Programming Sequence: Power On (Err 3 may be displayed if
phone has not been programmed)
Press CLR + * + * + 123123 + # + # (within 10
seconds)
0 will be displayed
Select NAM 1 thru 3 by entering 1, 2 or 3
Press RCL + step number + enter new information
+ STO (for each step)
(To enter unlock code 123; RCL + ) + 123 + STO)
Power OFF to exit program mode
Unlock Code: 3or4 XXX or XXXX + STO
System ID Format: 5 XXXXX + STO
Local Use Option: 1 1 + STO
MIN Option: 1 1 + STO
Mobile Number: 10 XXX-XXX-XXXX + STO
Station Class: 2 08 + STO
Initial Paging Channel: 3 333 or 334 + STO
Access Overload Class: 2 XX + STO
Preferred System: 1 1(A) or 0(B) + STO
Group Id Format: 2 XX + STO
Power OFF to exit program mode.
-------------------------------------------------------------------------------
CLARION 5100CT and 5200CT
-------------------------------------------------------------------------------
NAM Type: EEPROM
Manufacturer: Clarion
Programmer: Keypad
ESN Prefix DEC: 166
HEX: A6
ESN, S/N Match Required: Yes
Stamped Model Number: None (handset is labeled 5100CT or 5200CT)
Available Channels: 832
Programming Sequence: Power On (Err 3 may be displayed if
phone has not been programmed)
Press CLR + * + * + 123123 + # + # (within 10
seconds)
0 will be displayed
Select NAM 1 thru 3 by entering 1, 2 or 3
Press RCL + step number + enter new information
+ STO (for each step)
(to enter station class; RCL + 5 + 08 + STO)
Power OFF to exit program mode
Unlock Code: 3or4 XXX or XXXX + STO
System ID Format: 5 XXXXX + STO
Local Use Option: 1 1 + STO
MIN Option: 1 1 + STO
Mobile Number: 10 XXX-XXX-XXXX + STO
Station Class: 2 08 + STO
Initial Paging Channel: 3 333 or 334 + STO
Access Overload Class: 2 XX + STO
Preferred System: 1 1(A) or 0(B) + STO
Group ID Format: 2 XX + STO
Power OFF to exit program mode.
Display ESN: FCN + 6
Horn Alert: FCN + 8 + "+ or -"
New Unlock Code: NAM
System Select: FCN + 4 + "+ or -" (to scroll choices) + STO