------------------------------------------------------------------------------- HITACHI CR-111H transportable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Hitachi Programmer: Handset ESN Prefix DEC: 132 HEX: 84 ESN, S/N Match Required: No Available Channels: 832 Programming Sequence: Power On Select a NAM (A or B): A-FCN 621# FCN, B-FCN 622# FCN Enter Programming Mode with FCN 626 RCL Enter Data at each step then press Up of Down Write NAM with FCN 626 STO # of digits System ID Format: 5 XXXXX Local Use Option: 1 1 MIN Option: 1 1 System Select H/S: 1 1 Roam Inhibit: 1 0 Mobile Number: 10 XXX-XXX-XXXX Station Class: 2 08 (mobile) or 14 (portable) Initial Paging Channel: 3 333 or 334 Access Overload Class: 2 XX Preferred System: 1 1 (A) or 0 (B) Group ID Format: 2 XX Unlock Code: 3 or 4 End-to-End Signaling: 1 1 Handsfree: 1 0 or 1 Horn Alert: N/A New Unlock Code: NAM System Select: FCN + 9 + DOWN (DOWN to scroll system prompts) Enter Options: STO + FCN
------------------------------------------------------------------------------- HITACHI CR-2110H portable ------------------------------------------------------------------------------- NAM Type: EEPROM Manufacturer: Hitachi Programmer: Handset ESN Prefix DEC: 132 HEX: 84 ESN, S/N Match Required: No Handset Programming: Yes Number of Channels: 666 Programming Sequence: Power On Select NAM one or two with Sequence A or B A-OPT + DIAL + MAIN (for NAM 1) B-OPT + DIAL + SUB (for NAM 2) (Use OPT + 3 arrow keys to select functions from menu or screen) Enter Programming Mode with OPT 626 RCL Press UP(# Key) or Down(* Key) to increment Write NAM with OPT 626 STO # of digits System ID: 5 XXXXX Local Use: 1 1 MIN Option: 1 1 System Select from H/S: 1 1 Roam Inhibit: 1 0 Area Code: 3 XXX Phone Number: 7 XXX-XXXX Station Class: 2 XX Initial Page Channel: 4 0333 or 0334 Access Overload: 2 XX Preferred System: 1 0 (B) or 1 (A) Group ID: 2 XX Lock Code: 3 XXX End-to-End Signaling: 1 1 Handsfree: 1 0 or 1 Press OPT + 626 + STO to enter contents and exit program mode Horn Alert: N/A New Unlock Code: NAM System Select: OPT + SYST (Software Ke) + SCRL (Software Key) repeatedly. One of the following prompts will appear: SYS A/SYS B/SYS AB/SYS BA/HOME Press SELC (Software Key to enter selection)