YOU MUST HAVE MICROSOFT WINDOWS 3.0 TO RUN THIS PROGRAM

                    CATALIST 1.0 Installation


SECTION 1 -- CATALIST and ToolBook.

Note: It is recommended that you print this short document before
you begin installing CATALIST.

CATALIST is a ToolBook book.  It was written using Asymetrix's
ToolBook Version 1.5 for Windows.  You need ToolBook 1.5 or Runtime
ToolBook 1.5* to run CATALIST.  Runtime ToolBook 1.5 is included in
the FULLCAT.EXE archive.

If you already have ToolBook 1.5, you do not need most of the files
in the FULLCAT.EXE archive and you do not need to use the install
program.  If you have ToolBook 1.5 installed, but don't know how to
install the CATALIST.TBK and CATALIST.ICO files, get the CAT10.EXE
file instead of the FULLCAT.EXE file and follow the instructions in
the README.TXT that comes in the CAT10.EXE archive.

   * If you are familiar with Macintosh software you can compare
     ToolBook to Hypercard and CATALIST to a commercially produced
     Hypercard stack.


SECTION 2 -- Installing CATALIST 1.0 and Runtime ToolBook 1.5.

The installation process for CATALIST is quite simple and should
only take you a few minutes.  Just follow these steps:

1.   Extracting FULLCAT.EXE should have produced ten files:

     README.TXT (this file)
     INSTALL.EXE (the CATALIST installer)
     INSTALL.INF (installer data file)
     CATALIST.TBK (the CATALIST 1.0 application)
     CATALIST.ICO (the CATALIST 1.0 icon)
     TBOOK.EXE (Runtime ToolBook 1.5)
     TBKNET.EXE (ToolBook network file)
     TBKBASE.DLL (dynamic link library)
     TBKCOMP.DLL (dynamic link library)
     TBKUTIL.DLL (dynamic link library)

     Use File Manager or DOS to create a temporary directory on the
     same drive on which CATALIST is to be located.  This directory
     will be used to run the install program and will later be
     deleted.  In our examples, we will use the directory name
     C:\CATSETUP as the temporary directory.

2.   Using file manager or DOS, copy the ten files you extracted
     from the FULLCAT.EXE archive to the temporary directory.


3.   If you do not already have Windows running, start it and open
     Program Manager.

4.   Select File from the Program Manager menu bar.

5.   Select Run from the File menu to display the Run dialogue box.

6.   Type the path and filename of the CATALIST installer in the
     Command Line: text box.  For standard installations this
     should be:  C:\CATSETUP\INSTALL

7.   Click OK to run the CATALIST installer.

8.   Click Continue to accept the default C:\TOOLBOOK directory, or
     type a different directory name for CATALIST to use, then
     click Continue.

9.   Click OK to dismiss the CATALIST installer when installation
     is complete.

10.  The ToolBook group will appear in Program Manager.

11.  The CATALIST and ToolBook icons will appear in the ToolBook
     group.

12.  Once CATALIST is installed, use DOS or File Manager to delete
     all the files in the temporary C:\CATSETUP directory, then
     delete the directory itself.

This concludes CATALIST installation.  To start CATALIST, double-
click the CATALIST icon.

Once you have started CATALIST, please click the About CATALIST
button and read the About box for more information.


SECTION 3 -- Using CATALIST.

Actions in CATALIST are initiated in one of three ways:

1)   A single click on a button activates the function on the
     button label.  All buttons are shadowed to distinguish them
     from fields.

2)   A single click on a hotword will reveal the hotword's subfield
     or library page.  The pointer will change to a small window
     when it is over a hotword.

3)   A double click on a field will dismiss that field.  This is
     used to dismiss the About Box, the Telnet escape key field,
     the library system instruction fields, and unwanted
     geographical search fields.

The Notebook can be used to type personal notes or to store
clipboard entries from library screens, word-processors, or any
other source.  Notebook entries can likewise be clipped and pasted
to word-processors etc.  See your Windows documentation for
instructions on how to use the clipboard.

Context sensitive help is available at any time.  Just select
CATALIST Help... from the Help menu.


SECTION 4 -- Disclaimer.

The University of Delaware makes no claims as to the function of
CATALIST or its suitability for any purpose.  CATALIST is
distributed as is, with no warranty and no obligation on the part
of the University or the author for on-going support.  The
University and the author accept no responsibility for any loss or
damage resulting from the use of CATALIST.


SECTION 5 -- Contacting the author.

All correspondence relating to CATALIST should be directed to
Richard Duggan at any of the following:

Internet:      duggan@brahms.udel.edu

Bitnet:        fca02040@udelvm

U.S. Mail:     Richard H. Duggan
               204 Memorial Hall
               University of Delaware
               Newark, DE  19716

Office Phone:  (302) 292-3656

71891FULTXT