Generic librarian MIDI.EXE & DOC downloaded from East Coast Midi 2/17/89
by Dave Nosek Compuserve 72117,325.  The original author has offered this
program as Shareware for all of us to use and I'm sure you'll use it if you
have a Roland D10/20/110 and others.  If you've looked around for a bulk
load-dump librarian as I have, you know it's not easy to find one for bulk
transfer with your D10 and others.  Send this guy some money if you use it
it sure is worth something to me!  You'll find his name and address in
the MIDI.TXT doc file enclosed.

If you have a Roland D10 as I do, here is some help for bulk data
transfer to and from your keyboard.  DON'T FORGET TO SAVE WHAT YOU HAVE
IN YOUR KEYBOARD BEFORE YOU START LOADING NEW SOUNDS!!!!!!!!!!!!!


          EXECUTE THE MIDI.EXE FILE AND PRESS "P" FOR PATCH MODE

              TO TRANSMIT A FILE IE:D10TONES.WRK TO YOUR D10

 ON D10:
 1)Press DATA TRANSFER
 2)Press DISPLAY down twice to "ONE-WAY BULK"
 3)Press UPPER once "ONE-WAY DUMP SEL"
 4)Press DISPLAY down once "SOUND-RHYTHM"
 5)Press LOWER once
 6)Press ENTER
 7)Press WRITE
 8)Press ENTER
 COMPUTER KEYBOARD
 9)Press "T" on screen
10)Type in exact file name ie:D10TONES.WRK
11)Press ENTER (computer)
12)Screen will read "Do you want to send one block at a time?" answer NO
13)Your D10 is Loaded!
14)Press ESC on keyboard to clear your screen




              TO TRANSFER D10 PATCHES TO YOUR COMPUTER
                          (Do this first)

 COMPUTER KEYBOARD
 1)Press "R" receive
 2)Enter a file name you choose ie:ORIGBANK.D10
 3)Press ENTER
 4)"Do you want to send a dump request?" answer NO
 D10
 5)Press DATA TRANSFER
 6)Press DISPLAY down twice "ONE-WAY BULK"
 7)Press LOWER once "ONE-WAY DUMP SEL"
 8)Press DISPLAY down once "SOUND-RHYTHM"
 9)Press LOWER once "SOUND"
10)Press ENTER
11)You'll see flashing notes on your screen in brackets [ ] when
   finished press W to write the file to disk.
12)Press ESC (computer) to clear your screen
13)Guess what, you did it!


Of course you must have a MPU401 or equivalent.
I tried both bulk load and dumps several times and it works great for
me.  I can't guarantee this will work for you, but it should.  And of
course I am not liable for your use of this program or suggestions on
how to use it.  It does work!  If it doesn't perhaps your D10's version
of ROM is too low.  I'm using Ver. 1.04.  To find out what version of
ROM you have power off, then hold down edit and data transfer buttons
at the same time while you power up.

I hope all of this reduces your learning curve a bit, and you will create
new patches and upload them for all of us to enjoy!

Dave Nosek
alias THE PATCH HOG  (WARNING CREATING NEW SOUNDS IS VERY ADDICTING
DO SO AT THE RISK OF NOT COMPOSING SONGS MUCH ANYMORE!)