These drivers are copyrighted by Creative Labs Inc, and they are not for general distribution and should not be construed to be in the public domain. Microsoft Windows v3.00a with Multimedia v1.0 Drivers/SoundBlaster PRO These files will allow your OEM copy of MultiMedia Windows to work with the SoundBlaster Pro. These drivers will ONLY work with MultiMedia Windows - NOT standard Windows 3! Copy these files to your \MWINDOWS\SYSTEM subdirectory and edit your SYSTEM.INI file as follows. We are assuming your Multimedia Windows is installed in MWINDOWS directory: SYSTEM.INI : Edit to include the following settings: [drivers] Wave=sbpsnd.drv MIDI=sbpsnd.drv Joystick=ibmjoy.drv MIDI1=sbpfm.drv AUX=sbpaux.drv Timer=timer.drv [Multimedia.Setup] audio=sbpsnd.drv,220,7,1 display=vga ;REM - If your IRQ or I/O Addr settings are different, ;REM - change accordingly. [SoundBlaster] port=220 int=7 ;REM - If your IRQ or I/O Addr settings are different, ;REM - change accoringly dma=1 mastervolume=15,15 fmvolume=15,15 cdvolume=15,15 linevolume=11,11 voicevolume=15,15 NOTE: The 'audio' line in [Multimedia.Setup] contains the parameters for your I/O address, IRQ, and DMA channel. If your settings differ from those contained in the above example, change the values to match. The same information applies to the 'port' 'int' and 'dma' lines in the [SoundBlaster] setup. You can also customize the volume settings to your own tastes. 15 is maximum and 1 is minimum for each volume setting. If you have any difficulties or questions, call our Technical Support Line at (408)982-9226. Please note that these drivers are for our existing customers use and are not to be distributed into the public domain. All the contents of this archive is copyrighted by and belongs to Creative Labs Inc. Creative Labs Inc 11-21-91