**********************************************************************
 *                                                                    *
 *                This is 4712 mod for the Oki 900 Phone              *
 *                                                                    *
 *                         by   G.R.A.S.P.                            *
 *                                                                    *
 **********************************************************************

    This Mod
    ~~~~~~~~

    This is now plug and play.  Burn a chip and put it into the phone.
    All ESNs are cloned by the table below.


    Change ESN
    ~~~~~~~~~~

    Press MENU 8 times, until you see ADM menu.  Press RCL and enter 123456

    Use RCL to move from one ESN to another, and STO to save your options.
    
    REBOOT Phone!!!!!


    Program ESN: 
    ~~~~~~~~~~~


     Enter Debug Mode:

 		        7  9
		         MENU
		         SEND
		         END
		         RCL
		         STO
		         CLR
		         1  3



             --------------------------------
                 ESN Number     Address
             --------------------------------
               ESN Location #1  $BE8E-$BE91
               ESN Location #2  $BE93-$BE96
               ESN Location #3  $BE98-$BE9B
               ESN Location #4  $BE9D-$BEA0
               ESN location #5  $BEA2-$BEA5
              --------------------------------


   +--------------------+----------------------+----------------------+
   |                    |                      |                      |
   | To program ESN #1: |   To program ESN #2: |  To program ESN #3:  |
   |                    |                      |                      |
   |   #54 BE8E  XX     |     #54 BE93  XX     |    #54 BE98  XX      |
   |   #54 BE8F  XX     |     #54 BE94  XX     |    #54 BE99  XX      |
   |   #54 BE90  XX     |     #54 BE95  XX     |    #54 BE9A  XX      |
   |   #54 BE91  XX     |     #54 BE96  XX     |    #54 BE9B  XX      |
   |                    |                      |                      |
   +--------------------+----------------------+----------------------+
       |                         |                         |
       |   To program ESN #4:    |    To program ESN #5:   |
       |                         |                         |
       |     #54 BE9D  XX        |       #54 BEA2  XX      |
       |     #54 BE9E  XX        |       #54 BEA3  XX      |
       |     #54 BE9F  XX        |       #54 BEA4  XX      |
       |     #54 BEA0  XX        |       #54 BEA5  XX      |
       |-------------------------|-------------------------|

         Key:

             #54 XXXX xx
               |   |   |
               |   |  In order, one thru four bytes of ESN
               |   |
               |  Address (Location)
               |
             The write byte debug command 

       
        To use the 0-9 keys, just use 0-9, to access A-F, hit STAR ("*")
      before 1-6 for A-F.  The "*" key can be thought of as a shift key.       
      If you hit the "*" twice, it will at as if you did not hit the "*"
      at all. 

                      *1 = A
                      *2 = B
                      *3 = C
                      *4 = D
                      *5 = E
                      *6 = F



  Program NAM:
  ~~~~~~~~~~~~

  			RCL MENU
  			  STAR
  			   6
  		           2
  		           7
  		           2
  		           9
  		           8
  		           5
  		           4
  		           #

  (At this point use the up and down arrow keys on the side of the phone)